Tap, Order, Enjoy! Experience the Ease of Ordering Weed With Our iOS App

How to Grind Weed Without a Grinder

How to Grind Weed Without a Grinder?

Grinding your weed is the ultimate step that takes you one step closer to your much-awaited puff.

But hold your horses! Before you roll up the joint, make sure that your hard-earned weed is properly crushed and not uneven.

After all, it is the granularity or the form and structure of your weed that would decide the kind of puffs you are going to have.

Too powdery or too inconsistent of stuff would make it hard to ignite, burn, and smoke up the joint, thus ending up as a complete nightmare, plus a total waste of your money.

Carrying a grinder on the other hand with you at all times may not always be possible or practical should you be out, traveling, or don’t have one in the first place.

In any case, knowing how to crush your weed manually without using a grinder is something you must know should you want to make the most out of your pot break on the go.

Before we highlight some of the best ways to crush your weed manually, let’s get familiar with how a readymade weed grinder works.

What is a Weed Grinder?

A weed grinder or crusher, simply known as a grinder, is a flat and cylindrical-shaped device that has two separate halves, a top and a bottom, which opens and closes just like a box and its lid, or like a jar or container.

Both parts of a grinder have sharp teeth or tiny spikes on the inner edge which upon closing can be rotated back and forth to work as a compact manual shredder.

Typically made of plastic or metal, cannabis/ weed grinders come in a variety of shapes and colors, and can be grabbed at a mere $20-25. 

They can either have a single compartment or multiple layers separated by fine screens of sieve, mesh or sift that can be used to filter and extract the different compounds of dried marijuana. 

There are all kinds of weed grinders out there in the market from electric to manual, and often disguised as a spice or herb grinder.

Yet, grinders, whether off-the-street or off-the-shelf, whether manual or mechanical, aren’t the only way to crush your weed and get going with your fill of high.

Grinding it using your hands and household items such as a scissor is all too common in the cannabis community especially if you are a pothead or an experienced user.

On that note, let us find out some of the best ways you can use to grind weed without using a grinder.

Ways to Grind Weed Without a Grinder

1. Use your fingers

Perhaps no other way is more simple and convenient than using your own hands to break down the flower into tiny fine particles that are consistent throughout the weed for a seamless burning of your joint.

Unlike the grinder that crushes everything in its way, using your fingers allows you to carefully separate the flower from its stalk while also letting you filter out any unwanted materials such as an over-dried piece of wood or stem.

2. Cut with a knife or scissors 

Another way to grind your dried cannabis easily is by chopping or cutting it using a knife or a scissor.

To contain and collect your precious weed while you are at it, you might want to use a knife board, shot glass, or white paper.

Just make sure to not cut yourself in the process as it may need a little delicacy and attention to achieve a finely ground texture.

3. A Coffee grinder is the perfect alternative

An empty lying coffee grinder or even the one in use can be used as a weed grinder given that it is clean and free of any coffee residue.  

As a quick and effective method, grinding your weed in a coffee grinder takes seconds or minutes at best.

All you have to do is break your flower into smaller pieces and put them in your brew grinder.

For the right consistency, run the grinder for a few seconds at a time to be able to check the evenness of your flower in between. 

4. Or a cheese grater!

Similar to a coffee grinder, a cheese or nutmeg grater is yet another kitchen appliance that is very common to find.

Simply rub the buds back and forth on the grater one by one until you get the desired quantity, and that’s all!

Again, be careful while rubbing or grating the flower, and avoid hurting yourself.

5. How about mortar and pestle?

Speaking of kitchen appliances, how can we forget the age-old and classic combination of a mortar and pestle?

Albeit not so common in western societies, a mortar and pestle is a set of two simple tools that resemble a soup bowl and a tiny baseball bat-shaped club respectively.

Used for crushing and grinding spices and other ingredients, a mortar and pestle can also be used for grinding your weed in times of desperation.

The process includes placing the buds inside the bowl or mortar followed by a lot of pounding, pressing, and rotating of the pestle until the desired texture is achieved.

6. Break it down using a bottle and a coin

If you are running out of time and don’t want to ruin or spoil your fingers, then using a bottle and a coin could be a great solution.

Just put your weed in a clean pill bottle, add a penny or nickel to it, and close the lid.

Now do some shaking and breaking of your cannabis with all kinds of jiggling moves that you’ve got. Keep checking the bottle to see if the stuff is even enough. If not, then shake some more until you get the right texture.

Things to Consider When Grinding Weed Without a Grinder

When grinding cannabis without a grinder, it’s important to aim for consistency in the size of your buds. You want to break them down into pieces that are small enough to burn evenly and fully extract cannabinoids, but not so small that they’re powdery.

Overgrinding your cannabis can be problematic for a few reasons:

– It increases the surface area exposed to air, which can cause your cannabis to dry out faster. This leads to a quicker loss of terpenes and cannabinoids.

– Powdery cannabis burns very quickly and unevenly. You may end up with side effects like a headache or irritation from inhaling excess smoke.

– When vaping overground bud, it can end up sticking to your vaporizer screen and heating element. This reduces efficiency and flavor.

– For cooking with cannabis, you want a coarse, even grind. Overly fine cannabis can lead to uneven potency in edibles.

– Kief, the crystalline trichomes that contain high levels of THC, can be lost when ground too finely. Kief tends to sift through screens and accumulate at the bottom of grinders.

The best practice is to grind just enough to break down the buds, without pulverizing them into a powder. Go slowly and check the consistency as you grind. It can take some trial and error to find the right grind size for your preferred method of consumption.

Benefits of Proper Grinding

Properly grinding your cannabis flower is essential for optimizing the smoking or vaping experience. When cannabis is broken down into a fine, consistent grind, it allows for:

Enhanced extraction and potency: Grinding increases the surface area of the cannabis, allowing cannabinoids like THC and CBD to be more efficiently extracted and absorbed when smoked or vaped. Finely ground flower will produce more vapor or smoke, resulting in stronger effects.

Improved combustion and even burn: When cannabis is evenly ground, it will burn in a uniform manner, ensuring a smooth, consistent smoke. Fine particles combust readily and completely. Large chunks or uneven pieces can lead to uneven burns, wasted flower, and relighting.

Flavor and aroma enhancement: More surface area exposed by grinding allows more terpenes and flavonoids to be released, enhancing the distinctive flavors and scents of different strains. The finer the grind, the more pronounced the tastes and smells will be.

Proper grinding is a simple way to get the most out of your cannabis flower. Taking the time to break it down into a fine, uniform texture will lead to optimal extraction of cannabinoids, full combustion, and an enhanced terpene profile. Investing in a quality grinder or using alternative grinding methods can elevate the overall experience and effects.

Purchasing a Weed Grinder

Using a weed grinder can greatly enhance your cannabis experience. Here’s why and how to make it work for you:

A weed grinder works by breaking down your cannabis into smaller, more manageable pieces. Picture it like a mini food processor, but specifically for your herbs. When you load your herb into the grinder and give it a twist, the sharp teeth inside shred the herb into uniform bits. This consistency is key—it ensures that your cannabis burns evenly and smoothly when you smoke it.

Now, how can you make a weed grinder work for you? It’s simple. Invest in a good quality grinder. Look for one with sturdy teeth and a strong build that will last. When it’s time to grind, don’t overload the grinder—just put in enough herb for a single session. Give the grinder a few twists until the herb is ground to your desired consistency. Then, voila! You’re ready to roll, pack a bowl, or whatever your preferred method may be.

By using a weed grinder, you’ll get the most out of your cannabis. It’s efficient, it ensures a smooth smoke, and it’s just plain convenient. So next time you’re preparing to indulge, consider giving your herb the grinder treatment—it’s worth it.

Where to buy the best weed grinder in California

Looking for the best weed grinder in California? We’ve got you covered at Greenstone Dispensary. We offer a variety of grinders to fit different tastes and budgets, so there’s something for everyone. We only sell grinders from trusted brands, so you can be sure you’re getting a quality product. Our friendly and knowledgeable staff are here to help you find the perfect grinder, no matter your level of experience. Plus, with multiple locations across California and an online store, we make it easy to shop with us. Every grinder we sell undergoes strict quality checks to ensure it meets our standards. So, if you need a reliable weed grinder, come to Greenstone Dispensary.


Grinding cannabis properly before smoking or cooking is an essential step for ensuring an optimal experience. Though grinders provide the most consistent and fine results, this guide has outlined several common household methods that can work in a pinch. Using tools like scissors, knives, pill bottles, coffee grinders, or mortar and pestles allow you to break down buds into small, evenly sized pieces. This maximizes surface area for heating and extraction when smoking and leads to thorough infusion when cooking edibles. It also promotes smooth, even burns rather than side canoeing.

While improvising grinding solutions at home takes a bit more time and effort, it empowers cannabis consumers to prepare their bud however needed. One can tap into items already in the kitchen or garage for a quick grind. Purchasing a dedicated grinder is still recommended for frequent users who want maximum efficiency, consistency and kief collection. Brands like Greenstone offer high-caliber grinders known for quality construction and versatile features. As California dispensaries, we provide a trusted source for acquiring grinders and other cannabis accessories. With the proper tools and know-how, you can grind flower with ease to enhance the enjoyment of any consumption method.

Subscribe to Our Newsletter and Stay Updated